3C589 - DEC V5.1 install instructions

DEC Pathworks for DOS/Windows v5.1Installation

The following instructions assume that:

1. DEC Pathworks for DOS/Windows software has been installed on the hard drive from the installation diskettes or CD ROM. Refer to the DEC manual for installation instructions if the software has not been installed.

2. The user will install DEC Pathworks for DOS/Windows with one of the following templates: LAN Manager, Retail LAN Manager, Manageworks, Netware #1or #2, or Netware+LAN Manager. Refer to the DEC manual for installing all other templates and options.

Note: Please read the WFW.TXT file on the EtherDisk if installing Pathworks with WFW v3.11. Please run Autolink on the EtherDisk if installing Pathworks with Retail Netware.

1. Go to the drive where Pathworks software is installed.

2. Change directory to PCAPP:

3. Execute PWSETUP.

4. Enter the directory where you want the software installed. The default is C:\PW.

5. Choose CUSTOMIZE under the Select A Configuration Option menu.

6. Choose appropriate template in the Select a Workstation Template menu (see B above).

7. Under the Customize: Modify Workstation Configuration menu, put an X mark beside the Network Adapter Information line.

8. Additional menus will appear. Choose the appropriate options for your network environment. Refer to the DEC manual for questions regarding these menus.

9. Choose <Other Network Adapter> under the Customize: Network Adapter Information menu.

10. If installing options other than Netware:
Type a:\mslanman.dos\drivers\ethernet\elpc3\elpc3.dos on the Driver File: line.
Type a:\mslanman.dos\drivers\ethernet\elpc3\protocol.ini on the Protocol.ini Stub: line.

11. If installing for Netware, verify that (l) ODI is chosen under the Network Adapter section in the Customize: Network Adapter Information menu.
Type a:\netware\odi\3C589.com on the Driver File: line.
Type a:\netware\odi\net.cfg on the NET.CFG: line.

12. Verify that (l) Ethernet is marked and click OK.

13. Click OK under the Customize: Network Adapter Information menu.

14. Additional menus will appear. Follow the DEC instructions to complete the installation.