3C59x - OS/2 Warp Connect - Sample files: Config.sys, protocol.ini

Question: What is a sample CONFIG.SYS and PROTOCOL.INI for OS/2 Warp Connect and the 3C59X?

Answer: The configuration using ODI2NDI for NetWare support, IBM Peer Support, and IBM TCP/IP support connected to an IBM 755C is as follows:

CONFIG.SYS

IFS=C:\OS2\HPFS.IFS /CACHE:64 /CRECL:4
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,LAUNCHPAD
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=C:\MPTN\DLL;C:\IBMCOM\DLL;C:\IBMLAN\NETLIB;C:\MUGLIB\DLL;.;C:\OS2\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;C:\MMOS2\DLL;C:\GRPWARE;C:\NSC\DLL;C:\NETWARE;C:\NETWARE\NLS\ENGLISH;L:\OS2;P:\OS2;c:\tcpip\dll;C:\TCPIP\UMAIL;
SET PATH=C:\MPTN\BIN;C:\IBMCOM;C:\IBMLAN\NETPROG;C:\MUGLIB;C:\OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;C:\OS2\APPS;C:\MMOS2;C:\NSC;C:\NETWARE;L:\OS2;P:\OS2;c:\tcpip\bin;C:\TCPIP\UMAIL;
SET DPATH=C:\IBMCOM;C:\IBMLAN\NETPROG;C:\IBMLAN;C:\MUGLIB;C:\OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;C:\OS2\MDOS;C:\OS2\APPS;C:\MMOS2;C:\MMOS2\INSTALL;C:\GRPWARE;C:\NSC;C:\NETWARE;C:\NETWARE\NLS;C:\NETWARE\NLS\ENGLISH;L:\NLS;P:\NLS;
BASEDEV=DETNE2.SYS
SET PROMPT=$I[$P]
SET HELP=C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;C:\MMOS2\HELP;C:\NETWARE\NLS\ENGLISH;c:\tcpip\help;C:\TCPIP\UMAIL;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=YES
FILES=20
BASEDEV=IBMKBD.SYS
DEVICE=C:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANVDD.OS2
DEVICE=C:\OS2\LOG.SYS
DEVICE=C:\IBMCOM\LANMSGDD.OS2 /I:C:\IBMCOM
DEVICE=C:\IBMCOM\PROTMAN.OS2 /I:C:\IBMCOM
DEVICE=C:\OS2\BOOT\TESTCFG.SYS
DEVICE=C:\OS2\BOOT\DOS.SYS
DEVICE=C:\OS2\BOOT\PMDD.SYS
BUFFERS=90
IOPL=YES
DISKCACHE=D,LW,AC:C
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=C:\OS2\SYSTEM 2048 2048
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=134,134,134
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
SET BOOKSHELF=C:\IBMLAN\BOOK;C:\OS2\BOOK;C:\MMOS2;c:\tcpip\doc;
SET SOMIR=C:\OS2\ETC\SOM.IR;C:\OS2\ETC\WPSH.IR;C:\OS2\ETC\WPDSERV.IR
SET SOMDDIR=C:\OS2\ETC\DSOM
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;F:\DELETE,512;G:\DELETE,512;H:\DELETE,512;
BASEDEV=PRINT01.SYS
BASEDEV=IBM1FLPY.ADD
BASEDEV=IBM2FLPY.ADD
BASEDEV=XDFLOPPY.FLT
BASEDEV=OS2DASD.DMD
SET EPMPATH=C:\OS2\APPS;
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS
FCBS=16,8
RMSIZE=640
DEVICE=C:\NETWARE\VIPX.SYS
DEVICE=C:\NETWARE\VSHELL.SYS GLOBAL
DEVICE=C:\OS2\MDOS\VEMM.SYS
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\MDOS\VWIN.SYS
DEVICE=C:\OS2\MDOS\VW32S.SYS
DEVICE=C:\OS2\BOOT\OS2CDROM.DMD /Q
IFS=C:\OS2\BOOT\CDFS.IFS /Q
DEVICE=C:\OS2\MDOS\VCDROM.SYS
BASEDEV=CHINCDS1.FLT
BASEDEV=OS2SCSI.DMD
BASEDEV=AIC7870.ADD
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DEVICE=C:\OS2\BOOT\POINTDD.SYS
DEVICE=C:\OS2\BOOT\MOUSE.SYS SERIAL=COM1
DEVICE=C:\OS2\BOOT\COM.SYS
DEVICE=C:\OS2\MDOS\VCOM.SYS
CODEPAGE=437,850
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
DEVINFO=SCR,VGA,C:\OS2\BOOT\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_VGA
SET VIO_VGA=DEVICE(BVHVGA)
DEVICE=C:\OS2\MDOS\VSVGA.SYS
SET MMBASE=C:\MMOS2;
SET DSPPATH=C:\MMOS2\DSP;
SET NCDEBUG=4000
DEVICE=C:\MMOS2\SSMDD.SYS
DEVICE=C:\MMOS2\R0STUB.SYS
RUN=C:\OS2\EPW.EXE

REM --- NetWare Requester statements BEGIN ---
SET NWLANGUAGE=ENGLISH
DEVICE=C:\NETWARE\LSL.SYS
RUN=C:\NETWARE\DDAEMON.EXE
DEVICE=C:\IBMCOM\PROTOCOL\ODI2NDI.OS2
REM -- ODI-Driver Files BEGIN --
rem DEVICE=C:\NETWARE\NTR2000.SYS
REM -- ODI-Driver Files END --
DEVICE=C:\NETWARE\ROUTE.SYS
DEVICE=C:\NETWARE\IPX.SYS
DEVICE=C:\NETWARE\SPX.SYS
RUN=C:\NETWARE\SPDAEMON.EXE
rem DEVICE=C:\NETWARE\NMPIPE.SYS
rem DEVICE=C:\NETWARE\NPSERVER.SYS
rem RUN=C:\NETWARE\NPDAEMON.EXE
DEVICE=C:\NETWARE\NWREQ.SYS
IFS=C:\NETWARE\NWIFS.IFS
RUN=C:\NETWARE\NWDAEMON.EXE
rem DEVICE=C:\NETWARE\NETBIOS.SYS
rem RUN=C:\NETWARE\NBDAEMON.EXE
DEVICE=C:\OS2\MDOS\LPTDD.SYS
REM --- NetWare Requester statements END ---
CALL=C:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=C:\IBMCOM\LANMSGEX.EXE
SET ETC=C:\MPTN\ETC
RUN=C:\OS2\SYSTEM\LOGDAEM.EXE
DEVICE=C:\MPTN\PROTOCOL\SOCKETS.SYS
DEVICE=C:\MPTN\PROTOCOL\AFOS2.SYS
DEVICE=C:\MPTN\PROTOCOL\AFINET.SYS
DEVICE=C:\MPTN\PROTOCOL\IFNDIS.SYS
DEVICE=C:\MPTN\PROTOCOL\AFNB.SYS
RUN=C:\MPTN\BIN\AFNBINI.EXE
RUN=C:\MPTN\BIN\CNTRL.EXE
CALL=C:\OS2\CMD.EXE /Q /C C:\MPTN\BIN\MPTSTART.CMD
DEVICE=C:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=C:\IBMLAN\NETPROG\RDRHELP.200
IFS=C:\IBMLAN\NETPROG\NETWKSTA.200 /I:C:\IBMLAN /N
DEVICE=C:\IBMCOM\PROTOCOL\NETBIOS.OS2
DEVICE=C:\IBMCOM\MACS\EL59X.OS2
RUN=C:\IBMLAN\NETPROG\LSDAEMON.EXE
DEVICE=C:\IBMLAN\NETPROG\VNETAPI.OS2
RUN=C:\IBMLAN\NETPROG\VNRMINIT.EXE
SET NWDBPATH=C:\IBMLAN\NETPROG
SET TMP=c:\tcpip\tmp
DEVICE=c:\tcpip\bin\vdostcp.vdd
DEVICE=c:\tcpip\bin\vdostcp.sys
RUN=c:\tcpip\bin\VDOSCTL.EXE