Sample NDIS configuration files for EtherLink III in LANtastic AI

When installing LANtastic AI with NDIS support, read and follow the directions in the Artisoft manuals. If you need technical support, call Artisoft at (602) 670-7000.

Following are sample CONFIG.SYS, STARTNET.BAT, and PROTOCOL.INI files, showing how the EtherLink III can be installed with LANtastic AI. Use them as guides only; they may not provide a complete solution. Artisoft is your best source of information about configuring adapters for use with LANtastic AI.

PROTOCOL.INI:

[PROTMAN]
DRIVERNAME=PROTMAN$
DYNAMIC = YES
PRIORITY = AILANBIO

; 3Com 3C509
Do not put any I/O, interrupt, etc. settings in this file for this adapter. The following two lines are all that are needed.

[ETHERLINKIII]
DRIVERNAME = ELNK3$

STARTNET.BAT:

@ECHO OFF
PATH A:\LANTASTI;%PATH% Note: A: assumes LANtastic directory is on floppy drive

SHARE /L:200
AI-NDIS BIND_TO=ETHERLINKIII
AILANBIO
REDIR ASHES LOGINS=3
SERVER

NET LOGIN/WAIT \\ASHES ASHES
NET LPT TIMEOUT 10

CONFIG.SYS:

DEVICE=PROTMAN.DOS /I:A:\LANTASTI Note: A: assumes LANtastic directory is on floppy
DEVICE=ELNK3.DOS
FILES=50
BUFFERS=32
LASTDRIVE=Z
FCBS=16,8