3C90x - OS/2 Warp 3.0 - Error: Unable to bind

3Com has noticed that during the install of early releases of OS/2 Warp 3.0, the LAPS might incorrectly install the
3C90x NIC. If this does occur, the user will see the following message when the machine is rebooted:

LT00042: The EL90XIO2_nif MAC was not able to bind. Return code = 0x22
PR00025: An error occurred when the program tried to bind LANDD to EL90XIO2_nif

To work around this issue, edit the PROTOCOL.INI file and locate the following section:
[EL90XIO2_nif]

Under this section, change the line
DriverName = EL9X$ to DriverName = EL90X$

Note that this problem only occurs in earlier releases of OS/2 Warp 3.0 and not in later releases.