![[previous]](../../../graphics/l_arrow.gif){kind=icon}
![[next]](../../../graphics/r_arrow.gif){kind=icon}
Syntax
SETDefault -APPN QueuePriority = <H|M|L|DEFault>
SHOw -APPN QueuePriority
Medium
The QueuePriority parameter assigns a priority to an APPN-routed packet destined for a wide area network using PPP, PLG, Frame Relay, or SMDS. Possible priorities include high, medium, or low. If this parameter is set to default, the system uses the setting of the -PORT DefaultPriority parameter. For more information on the -PORT DefaultPriority parameter, see "DefaultPriority" in the PORT Service Parameters chapter.
You can display the setting of this parameter by entering the SHow -APPN QueuePriority command.