[previous] Clear Spacer [next]

AdjLenDef

Syntax

ADD -APPN AdjLenDef [adjnetid.]<adjcpname> [adjlu ...]
DELete -APPN AdjLenDef [adjnetid.]<adjcpname> [adjlu ...]
SHow -APPN AdjLenDef [[netid.]cpname]

Default

No default

Description

The AdjLenDef parameter statically defines logical units (LUs) in adjacent low entry networking (LEN) end nodes into the network node directory database. There are two situations in which you may need to statically define LEN end node LUs into the directory database:

adjnetid.

Enters the net ID of the adjacent LEN node. When you enter the net ID, you must enter a period following it. The adjacent CP name follows the period without a space. If you do not enter the net ID, the net ID of the network node will be used.

<adjcpname>

Enters the nonqualified CP name of the adjacent LEN node.

adjlu

Enters the name of the LUs associated with the adjacent LEN node. The LU name can be from one to eight characters. You can enter up to four LU names when entering the command. To enter additional LUs, reenter the command. You can define up to 256 LUs for all adjacent LEN nodes defined.

Using the DELete command, you can delete individual LUs by specifying the LU name. If no LUs are specified with the DELete command, all LUs belonging to the adjacent LEN node will be deleted.

[previous] Clear Spacer [next]