Syntax

SHow -APPN AppnLOG

No default

Description

The AppnLOG parameter displays a log of APPN activity messages captured on the bridge/router and stored in a buffer. The display shows the most recent activity messages, up to a limit of 256. Table 17 lists the event types captured in the log, and the corresponding message displayed. The lowercase "a" in the table denotes the various node or link names as part of the message.

Table 17 APPN Log Event Types and Messages

Event Type	Message displayed
Local network node activated	LOCAL NETWORK NODE aaaaaaaa.aaaaaaaa is STARTED
Local network node deactivated	LOCAL NETWORK NODE aaaaaaaa.aaaaaaaa is STOPPED
Link station activated	Link aaaaaaaa to aaaaaaaa.aaaaaaaa is UP
Link station deactivated	Link aaaaaaaa to aaaaaaaa.aaaaaaaa is DOWN
Downstream PU activated	Pipe to aaaaaaaa.aaaaaaaa is UP
Downstream PU deactivated	Pipe to aaaaaaaa.aaaaaaaa is DOWN
Downstream LU activated	SSCP_PU session for dspu aaaaaaaa.aaaaaaaa on link aaaaaaaa is UP
Downstream LU deactivated	SSCP_PU session for dspu aaaaaaaa.aaaaaaaa on link aaaaaaaa is DOWN
CP-CP session activated	CONWINNER CP-CP session with aaaaaaaa.aaaaaaaa is UP CONLOSER CP-CP session with aaaaaaaa.aaaaaaaa is UP
CP-CP session deactivated	CONWINNER CP-CP session with aaaaaaaa.aaaaaaaa is DOWN CONLOSER CP-CP session with aaaaaaaa.aaaaaaaa is DOWN
RTP connection activated	RTP connection aaaaaaaa.aaaaaaaa is UP
RTP connection deactivated	RTP connection aaaaaaaa.aaaaaaaa is DOWN
RTP connection switched path	RTP connection aaaaaaaa.aaaaaaaa did a path switch