Reference for Enterprise OS Software

[previous]

[next]

QueuePriority

: SHow -POrt QueuePriority

Default

Description

The QueuePriority parameter displays the settings of the following parameters:

-POrt DefaultPriority
-IP QueuePriority
-LLC2 TUNnelPRiority

The display summarizes the priority assigned to IP and LLC2 tunnel packets. The display also shows the default priority assigned to a packet if any of the following conditions are met:

The packet does not have a system-assigned priority.
The -LLC2 TUNnelPRiority or -IP QueuePriority parameter is set to DEFault.
You did not set up a mask and prioritization policy for a particular type of packet

For more information on these parameters, see the following:

The -POrt DefaultPriority parameter earlier in this chapter.
The -IP QueuePriority parameter in the IP Service Parameters chapter.
The -LCC2 TUNnelPRiority parameter in the LLC2 Service Parameters chapter.

[previous]

[next]