![[previous]](../../../graphics/l_arrow.gif){kind=icon}
![[next]](../../../graphics/r_arrow.gif){kind=icon}
Syntax
ADD TrapProfile "<TrapProfileName>" [AUDitLog] [AUTH] [Dot1dBridge] [DLSw] [DLSWSna] [FrameRelay] [GEnr] [ISDN] [PATH [PORT] [REMote] [RMon] [SDLC] [SYS] [VPN]\
DELete TrapProfile "<TrapProfileName>"
SHow -snmp TrapProfile
None
The TrapProfile parameter allows users to add or delete trap profiles. The settings are associated with a profile name and are used when a Manager is configured. There are five predefined profiles. Users are not allowed to change the settings of, or delete the predefined profiles. The following example shows the predefined profiles with their respective settings.
|
ProfileName |
Setting |
|
DEFAULT |
(UseDefault) Meaning that we use the per community trap setting. |
|
GEN |
(Gen) |
|
AUTH |
(Auth) |
|
ALL |
(ALL) |
|
NONE |
(NONE) |
Values
|
Allows the user to configure trap settings on a per-Manager basis. If no TrapProfileName is provided when the manager is configured the per community string setting is used. | |
|---|---|
|
|
|