![[previous]](../../../graphics/l_arrow.gif){kind=icon}
![[next]](../../../graphics/r_arrow.gif){kind=icon}
Syntax
SETDefault !<port> -SR MinAccessPrior = <number> (0-6)
SHow [!<port> | !*] -SR MinAccessPrior
SHowDefault [!<port> | !*] -SR MinAccessPrior
4
The MinAccessPrior parameter determines the minimum access priority used for outgoing frames on a specified port. The lowest priority is 0; the highest is 6. End systems usually have a low access priority, while bridges have a medium. This allows bridges, which typically handle larger volumes of data, to get the token faster than end systems. If the user priority of the frame is greater than the minimum access priority, the user priority is used as the access priority. The user priority of the frame is determined by the access priority of an incoming token ring frame.