Syntax

SETDefault !<port> -SR RouteDiscovery = ([All | None] | [AppleTalk | NoAppleTalk], [CLNP | NoCLNP], [DECnet | NoDECnet], [DLTest | NoDLTest], [IP | NoIP], [IPX | NoIPX], [LLC2 | NoLLC2], [VINES | NoVINES])

SHow [!<port> | !*] -SR RouteDiscovery

SHowDefault [!<port> | !*] -SR RouteDiscovery

None

Description

The RouteDiscovery parameter specifies whether end system source routing is enabled on the port, and which routing protocols are being routed over the port.

Values

All	All indicates that route discovery is initiated for all end system packets (AppleTalk, Connectionless Network Protocol (CLNP), DECnet, DLTest, Internet Protocol (IP), Internetwork Packet Exchange (IPX), Logical Link Control, type 2 (LLC2), or VINES) if a route to the destination end system does not exist in the local routing table.
None	None indicates that all end system packets are transmitted as transparent frames, which can reach end systems in transparent bridged or SRT bridged environments.
AppleTalk | NoAppleTalk	AppleTalk indicates that route discovery is initiated for AppleTalk end system packets. This discovery process occurs when a route to the end system does not exist in the local routing table. NoAppleTalk indicates that AppleTalk end system packets are transmitted as transparent frames.
CLNP | NoCLNP	CLNP indicates that route discovery is initiated for CLNP end system packets. This discovery process occurs when a route to the end system does not exist in the local routing table. NoCLNP indicates that CLNP end system packets are transmitted as transparent frames.
DECnet | NoDECnet	DECnet indicates that route discovery is initiated for DECnet end system packets. This discovery process occurs when a route to the end system does not exist in the local routing table. NoDECnet indicates that DECnet end system packets are transmitted as transparent frames.
DLTest | NoDLTest	DLTest indicates that route discovery is initiated for DLTest end system packets. This discovery process occurs when a route to the end system does not exist in the local routing table. NoDLTest indicates that DLTest end system packets are transmitted as transparent frames.
IP | NoIP	IP indicates that route discovery is initiated for IP end system packets. This discovery process occurs when a route to the end system does not exist in the local routing table. NoIP indicates that IP end system packets are transmitted as transparent frames.
IPX | NoIPX	IPX indicates that route discovery is initiated for IPX end system packets. This discovery process occurs when a route to the end system does not exist in the local routing table. NoIPX indicates that IPX end system packets are transmitted as transparent frames.
LLC2 | NoLLC2	LLC2 indicates that route discovery is initiated for LLC2 end system packets. This discovery process occurs when a route to the end system does not exist in the local routing table. NoLLC2 indicates that LLC2 end system packets are transmitted as transparent frames.
VINES | NoVINES	VINES indicates that route discovery is initiated for VINES end system packets. This discovery process occurs when a route to the end system does not exist in the local routing table. NoVINES indicates that VINES end system packets are transmitted as transparent frames.