![[previous]](../../../graphics/l_arrow.gif){kind=icon}
![[next]](../../../graphics/r_arrow.gif){kind=icon}
Syntax
FLush [!<port>| !*] -SR WanRoutes
SHow [!<port> | !*] -SR WanRoutes
No default (no WAN routes)
The WanRoutes parameter displays or flushes all learned remote routes. Each remote source route for a Frame Relay port has an associated Frame Relay address or data link connection identifier (DLCI). Each source route for an SMDS port has an associated SMDS individual address. Each source route for an X.25 port has an associated X25 DTE address.
FLush clears out all source routes learned across a Frame Relay, SMDS, or X.25 ring. This forces the end systems to redo the route discovery, since the SR bridge discards all traversing frames to and from the ring until the routes are relearned from the explorer frames. The learned routes are automatically flushed when the RingNumber or BridgeNumber is changed, or when source route bridging is turned off.
SHow displays all the currently learned source routes and the associated DLCI, SMDS individual address, or X.25 DTE address for each learned route. If the port is specified, the display for port-related parameter values is limited to that port.