S
- Security icon 3-3
- Security Management option
- User Login 7-1, 7-2
- Security Management, overview 7-1
- SEFS statistic type 5-4
- selecting a type of management 3-3
- Serial # field 4-4, 4-7, 4-9, 4-11, 4-14, 4-16, 4-18, 4-20, 4-23, 4-28, 4-32, 4-36, 8-4
- Set Community parameter 7-3
- setting SNMP parameters 8-9
- setting up AccessBuilder 9600 devices 3
- Sev field 6-6, 6-7
- Shaper field 4-47, 4-54, 4-59, 4-61
- Shelf Equipment Information
- viewing 4-3
- window 4-3
- Shelf Equipment Information fields
- Card-Type 4-4
- Part # 4-4
- Rev # 4-4
- Serial # 4-4
- Slot # 4-4
- Shelf Equipment Information window (figure) 4-3
- Shelf Location field 8-4
- Shelf Name field 8-4
- Shelf Property Administration Management option 8-1
- Shelf Property Configuration fields
- (Bridge) Age Timer 8-4
- (Default Trap gateway) Ip Address 8-6
- (Default Trap gateway) Subnet Mask 8-6
- (Power Supply) Alarm Reporting 8-4
- (Power Supply) Oper Status 8-4
- (Trap Client) Ip Address 8-5
- (Trap Client) Port 8-6
- (Trap Client) Subnet Mask 8-6
- Contact 8-4
- Customer Name 8-4
- HW Revision 8-3
- Phone Number 8-4
- Serial # 8-4
- Shelf Location 8-4
- Shelf Name 8-4
- Shelf Property Information, configuring 8-3
- Shelf Property option 4-66
- Shelf Property window (figure) 8-3
- Signalling field 4-39
- Signalling Type field 4-51
- Single Collision Frames field 5-9
- Slot # field 4-4
- Slot field 6-6, 6-7
- Slot:Port field 4-68
- SNMP parameters, setting 8-9
- SNMP Property Administration Management option 8-1
- SNMP property parameters
- Date 8-10
- SNMP Set Community 8-9
- Time 8-10
- SNMP Property window (figure) 8-9
- SNMP Set Community parameter 8-9
- snmpRetry field 2-3
- Sonet Mode field 4-21
- source or destination MAC address
- adding 4-71
- deleting 4-71
- modifying 4-71
- SQE Test Errors field 5-9
- Standby Firmware field 4-7, 8-11
- Statics Type field 4-68
- statistic types
- CCV 5-4
- CES 5-4
- CSES 5-4
- current 5-3
- interval 5-3
- LCV 5-4
- LES 5-4
- PCV 5-4
- PES 5-4
- PSES 5-4
- SEFS 5-4
- total 5-3
- UAS 5-4
- supported devices A-1
- Switch Firmware information
- Active Firmware 8-10
- Standby Firmware 8-11
- Switch Firmware window (figure) 8-10
- switching firmware 8-10
- synchronizing, definition 6