DEC PATHWORKS

The DEC PATHWORKS for DOS/Windows software must be installed on the hard drive. Refer to the DEC documentation for installation instructions if the software has not been installed and for templates and options.

Run the AutoLink program on the Installation Disk if you are installing DEC PATHWORKS with Retail NDIS or NDIS with ODI drivers. To install DEC PATHWORKS for DOS/Windows 5.1, follow these steps:

Go to the drive where the PATHWORKS software is installed.
Go to the PCAPP directory.
Execute PWSETUP.
Enter the name of the directory where you want the software installed.

The default is C:\PW

Select CUSTOMIZE under the Select a Configuration Option menu.
Select a template in the Select a Workstation Template menu.
Under the Customize: Modify Workstation Configuration menu, put an X beside the Network Adapter Information line.
Choose the appropriate options for your network environment.

Refer to the DEC documentation for information regarding these menus.

Choose Other Network Adapter under the Customize: Network Adapter Information menu.
If you are not installing Retail NDIS or NDIS with ODI drivers, follow these instructions:

On the Driver File line, type:

a:\mslanman.dos\drivers\ethernet\EL3C574\EL3C574.DOS

On the PROTOCOL.INI Stub line, type:

a:\mslanman.dos\drivers\ethernet\EL3C574\protocol.ini

Verify that (l) Ethernet is marked and click OK.
Click OK under the Customize: Network Adapter Information menu.

Additional menus will appear.

Follow the DEC instructions to complete the installation.

If you are not using Card Services and you are using a memory manager, you must exclude the CIS memory address range for the LAN card and other Card Services devices.

Reboot the PC.

To install the driver for DOS/Windows version 4.1 see
the PATHWORK.TXT file in the HELP directory on the Installation Disk.