Fields in the IP OSPF Areas Display

Field	Description
Advertise	Whether the network range is advertised (y) or not (n)
AreaID	Area identifier
Indx	Entry index number for the area
IP Address	Network portion of IP address range
Mask	IP address range subnet mask
Stub	Whether the area is a stub area (y) or not (n)

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
Area ID	In the form of an IP address; functions as an area identification number to the OSPF autonomous system	Up to 255.255.255.255	-
Stub area	Whether this area is a stub area	yes no	No (factory default), or current value

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Options

Prompt	Description	Possible Values	[Default]
Area	Index number of the area that you want to modify	Valid area index number ? (for a list of selectable values)	-
Area ID	In the form of an IP address; functions as an area identification number to the OSPF autonomous system	Up to 255.255.255.255	-
Stub area	Whether this area is a stub area	yes no	no (factory default), or current value

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Options

Prompt	Description	Possible Values	[Default]
Area	Index number of the area that you want to remove	Valid area index number ? (for a list of selectable values) all	First available index number

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Options

Prompt	Description	Possible Values	[Default]
Area	Index number of the area to which you want to add the range	Valid area index number ? (for a list of selectable values)	-
IP address	IP address of the range that you want to add to the area	Up to 255.255.255.255	-
Subnet mask	Subnet mask of the range that you want to add to the area	Variable, based on address range class	Variable, based on address range class
Advertise range	Whether to advertise area range	yes no	yes

Options

Prompt	Description	Possible Values	[Default]
Area	Index number of the area that contains the range that you want to modify	Valid area index number ? (for a list of selectable values)	-
IP address of range	Existing range that you want to modify (in the form of an IP address)	Up to 255.255.255.255	-
IP address	Range (in the form of an IP address)	Up to 255.255.255.255	Current value
Subnet mask	Subnet mask of the range that you want to modify	Variable, based on address range class	Current value
Advertise range	Whether to advertise the area range	yes no	Current value

IP OSPF Areas Modify Range Example

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Options

Prompt	Description	Possible Values	[Default]
Area	Index number of the area that contains the range that you want to delete	Valid area index number ? (for a list of selectable values)	-
IP address	IP address of the range that you want to delete	Up to 255.255.255.255	-

Important Considerations

Field in the IP OSPF Default Route Metric Display

Field	Description
Default route metric	Cost (metric) that is associated with the default route

Important Considerations

Options

Prompt	Description	Possible Values	[Default]
Default route metric	Cost (metric) that is associated with the default route	1 - 65535	-

Important Considerations

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Fields in the IP OSPF Interface Summary Display

Field	Description
AreaID	OSPF area to which the interface belongs
Dead Intvl	Time interval before OSPF declares that a neighbor is dead
Hello Intvl	OSPF hello packet transmit interval for the interface
Indx	Interface entry index; same number as the IP interface index
Password	Password that is associated with the OSPF interface
Pri	OSPF router priority for the interface
Rxmit Intvl	LSA retransmit interval
Xmit Cost	Interface transmit cost
Xmit Delay	Interface transmit delay

Important Consideration

Fields

Field	Description
AreaID	OSPF area to which the interface belongs
BDR	Router ID of the backup designated router (BDR)
Dead Intvl	Time interval (in seconds) before OSPF declares that a neighbor is dead
DR	Router ID of the designated router (DR)
Hello Intvl	OSPF hello packet transmit interval (in seconds) for the interface
Indx	Index number corresponding to the IP interface for which OSPF information is displayed
IP address	IP address of the OSPF interface
Notes	When RouterID appears, indicates that the interface address is being used as the OSPF router ID
Password	Password that is associated with the OSPF interface
Pri	OSPF router priority for the interface
Rxmit Intvl	LSA retransmit interval (in seconds)
State	Interface state: Disabled - OSPF is not enabled on the interface. Down - Interface is down, but OSPF is enabled on it. Loopback - Interface is a loopback interface. Waiting - Router is trying to determine the identity of the DR and BDR on the network. PTP - Interface is operational and connects to either a point-to-point network or a virtual link. The router attempts to form adjacency with the neighboring router. DRother - Interface is on a multiaccess network where this router is not the designated router or backup designated router. Backup - Router is the backup designated router on the attached network. DR - Router is the designated router on the attached network.
Xmit Cost	Interface transmit cost
Xmit Delay	Interface transmit delay

in the IP OSPF Interface Detail Display

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of the interface for which you want to display statistics	Valid interface index number all ? (for a list of selectable values)	-

Fields in the IP OSPF Interface Statistics Display

Field	Description
adjacencyDown	Number of times that OSPF adjacencies have gone down
adjacencyUp	Number of times that OSPF adjacencies have been formed
authError	Number of authentication errors
computeDR	Number of times that the designated router has been computed
lsaXsumError	Number of LSA checksum errors that were detected
mismatchAreaID	Number of interface area ID mismatches that were detected
mismatchAreaType	Number of interface area type mismatches that were detected
mismatchDead	Number of router dead interval mismatches that were detected
mismatchHello	Number of hello packet interval mismatches that were detected
mismatchMask	Number of subnet mask mismatches that were detected
packetXsumError	Number of packet checksum errors since interface has come up
receiveDD	Number of database description packets that were received
receivedUnknown	Number of unknown LSAs that were received
receiveError	Number of general receive errors
receiveHello	Number of hello packets that were received
receiveLsAck	Number of LSA acknowledgments that were received
receiveLSR	Number of LSA request packets that were received
receiveLSU	Number of link state update packets that were received
transmitDD	Number of database description packets that were transmitted
transmitError	Number of general transmit errors
transmitHello	Number of hello packets that were transmitted
transmitLsAck	Number of LSA acknowledgments that were transmitted
transmitLSR	Number of LSA request packets that were transmitted
transmitLSU	Number of link state update packets that were transmitted

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of one or more IP interfaces on which you want to enable or disable OSPF	One or more Valid IP interface index numbers all ? (for a list of selectable values)	all (factory default), or current value
OSPF mode	Whether to disable or enable OSPF on the specified IP interface	disabled enabled	disabled (factory default), or current value

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of one or more IP interfaces to which you want to assign a priority	One or more valid IP interface index numbers all ? (for a list of selectable values)	all (factory default), or current value
Priority	Interface priority	0 - 255	1

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Important Considerations

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of one or more interfaces that you want to associate with the area	One or more valid IP interface index numbers all ? (for a list of selectable values)	all (factory default), or current value
Area ID	ID of area with which you want to associate the specified interfaces	Valid area ID (in IP address form)	0.0.0.0 (factory default), or current value

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of one or more interfaces to which you want to assign a cost	One or more valid IP interface index numbers all ? (for a list of selectable values)	all (factory default), or current value
Cost	Cost that you want to assign to the specified interface	1 - 65535	Cost of slowest port (usually 1)

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of one or more interfaces for which you want to set the transmit delay	One or more valid IP interface index numbers all ? (for a list of selectable values)	all (factory default), or current value
Transmit delay	Delay (in seconds) that you want to assign to the specified interface	1 - 65535 seconds	1 (factory default), or current value

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Important Considerations

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of one or more interfaces for which you want to set the Hello interval	One or more valid IP interface index numbers all ? (for a list of selectable values)	all (factory default), or current value
Hello packet interval	Interval (in seconds) at which the interface transmits Hello packets	1 - 65535	10 (factory default), or current value

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of one or more interfaces on which you want to set the LSA retransmit interval	One or more valid IP interface index numbers all ? (for a list of selectable values)	all (factory default), or current value
LSA retransmit time	Interval at which the specified interface retransmits LSAs	1 - 65535 seconds	5 (factory default), or current value

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of one or more interfaces on which you want to set the dead interval	One or more valid IP interface index numbers all ? (for a list of selectable values)	all (factory default), or current value
Dead interval	Maximum duration (in seconds) that neighbor routers will wait for a hello packet before they determine that the transmitting router is inactive	1 - 65535	40 (factory default), or current value

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of one or more interfaces for which you want to assign or remove a password	One or more valid IP interface index numbers all ? (for a list of selectable values)	all (factory default), or current value
Password	Password for the specified interface	Up to eight ASCII characters none (to remove previously assigned password)	none (factory default), or current value

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
Area ID	Area ID corresponding to the OSPF area for which you want to view LSA summary information	Valid area ID in the form of an IP address	0.0.0.0 (factory default), or current value
Area mask	Subnet mask of OSPF area for which you want to view LSA summary information	Valid area mask in the form of a subnetwork mask	0.0.0.0 (factory default), or current value

Fields

Field	Description
Checksum summation	Total of all LSA checksums
External LSAs	Number of external link LSAs
LSA count	Number of LSAs
Network LSAs	Number of network link LSAs
Router LSAs	Number of router link LSAs
Summary LSAs	Number of summary link LSAs

in the IP OSPF Link State Data Database Summary Display

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
Area ID	Area ID corresponding to the OSPF area for which you want to view router link state advertisement information	Valid area ID (in the form of an IP address)	0.0.0.0 (factory default), or current value
Area mask	Subnet mask of OSPF area for which you want to view router link state advertisement information	Valid area mask	0.0.0.0 (factory default), or current value
LSID	Link State ID: router ID of the originating router	Router ID (in the form of an IP address)	0.0.0.0 (factory default), or current value
LSID mask	Link State ID bit mask	Link State ID bit mask Example: 255.0.0.0	0.0.0.0 (factory default), or current value

Fields in the IP OSPF Link State Data Router Display

Field	Description
Flags	V - Router is the endpoint of an active virtual link that is using the area as a transmit area. ASBR - Router is an autonomous system boundary router. ABR - Router is an area border router.
Link Data	PTP - MIB II index value for an unnumbered point-to-point interface. Transit Net - IP interface address of designated router Stub Net - Network IP address mask Virtual link - IP interface address of neighboring router
Link ID	PTP - Neighboring router's router ID Transit Net - Address of designated router Stub Net - IP network/subnetwork number Virtual link - Neighboring router's router ID
Link Type	PTP - Connection is point-to-point to another router. Transit Net - Connection is to a transit network (one that has more than one OSPF router on it). Stub Net - Connection is to a stub network. Virtual link - Connection is to a far-end router that is the endpoint of a virtual link.
LS Age	Time (in seconds) since LSA was originated
LS Seq	Sequence number of the LSA (used to detect older duplicate LSAs)
LSID	ID number of the router that originated the LSA
Metric	Cost of the link
Router ID	Remote router ID

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
Area ID	Area ID corresponding to the OSPF area for which you want to view network LSA information	Valid area ID (in the form of an IP address)	0.0.0.0 (factory default), or current value
Area Mask	Subnet mask of OSPF area for which you want to view network LSA information	Valid area mask in the form of a subnet mask	0.0.0.0 (factory default), or current value
LSID	Link State ID: interface address of the designated router	Valid IP address	0.0.0.0 (factory default), or current value
LSID mask	Link State ID bit mask	Link State ID bit mask. Example: 255.0.0.0	0.0.0.0 (factory default), or current value

Fields in the IP OSPF Link State Data Network Display

Field	Description
Attached routers	List of routers that are fully adjacent to the designated router (DR); also the DR
LS Age	Time (in seconds) since the LSA was originated
LS Seq	Sequence number of the LSA (used to detect older duplicate LSAs)
LSID	Interface address (in the form of an IP address) of the designated router
Network mask	IP address mask for the network
Router ID	Originating router ID

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
Area ID	Area ID corresponding to the OSPF area for which you want to view summary LSA information	Valid area ID (in the form of an IP address)	0.0.0.0 (factory default), or current value
Area mask	Subnet mask of the OSPF area for which you want to view summary LSA information	Valid area mask	0.0.0.0 (factory default), or current value
LSID	Link State ID. For type 3 summary LSAs, this is the IP address of the destination network For type 4 summary LSAs, this is the autonomous system boundary router's Router ID	For type 3 summary LSAs, a valid IP address For type 4 summary LSAs, a valid router ID (in the form of an IP address)	0.0.0.0 (factory default), or current value
LSID mask	Link State ID bit mask	Link State ID bit mask. Example: 255.0.0.0	0.0.0.0 (factory default), or current value

Fields in the IP OSPF Link State Data Summary Display

Field	Description
LS Age	Time (in seconds) since LSA was originated
LS Seq	Sequence number of the LSA (used to detect older duplicate LSAs)
LSID	Type 3 - Destination network's IP address Type 4 - ASBR's OSPF router ID
Metric	Cost to reach the network
Network mask	For Type 3 - destination network's IP address mask For Type 4 - Not used, must be 0 (--)
Router ID	Originating router ID

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
LSID	Link State ID (in the form of the destination network's IP address)	Valid IP address	0.0.0.0 (factory default), or current value
LSID mask	Link State ID bit mask	Link State ID bit mask. Example 255.0.0.0	0.0.0.0 (factory default), or current value

Fields in the IP OSPF Link State Data External Display

Field	Description
Fwd Address	Forwarding address for data traffic to the advertised destination
LS Age	Time (in seconds) since LSA was originated
LS Seq	Sequence number of the LSA (used to detect older duplicate LSAs)
LSID	IP network number
Metric	Cost to reach advertised destination
Network Mask	IP address mask for the advertised destination
Router ID	Originating router ID
RouteTag	Not used by OSPF; these 32 bits may be used to communicate other information between boundary routers. Tag contents are defined by applications.
Type	Type 1 - normal link state metric Type 2 - metric is larger than any local link state path

Fields in the IP OSPF Neighbors Display

Field	Description
Flags	Neighbor identification flags: D - Dynamic neighbor S - Static neighbor BDR - Backup designated router DR - Designated router Example: [S, BDR] + [D, DR] is a static neighboring backup designated router and a dynamic neighboring designated router
Indx	Interface index corresponding to the interface to which a neighbor belongs
Neighbor Addr	Interface address of neighbor
Pri	Neighbor's OSPF router priority
ReqQ	Number of LSAs being requested from neighbor
Router ID	Neighbor's OSPF router ID
RxQ	Number of LSAs in local retransmit queue to the neighbor
State	Neighbor's adjacency: Down - No recent data received from neighbor, connection is down. Attempt - Only used on nonbroadcast networks. No recent data received from neighbor (will attempt to contact). Init - Have recently seen Hello packet from neighbor; however, two-way communication has not been established. Two-way - Bidirectional communication has been established. ExStart - Taking initial step to create adjacency between neighboring routers. Exchange - Database descriptions are being exchanged. Loading - LSA databases are being exchanged. Full - Neighboring routers are fully adjacent.
SumQ	Number of LSAs in LSA summary queue for the neighbor

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of the interface to which you want to add a neighbor	Valid interface index number ? (for a list of selectable values)	First available (factory default), or current value
Static neighbor address	Address of neighbor that you want to define	Valid IP address on interface subnetwork	-

Options

Prompt	Description	Possible Values	[Default]
IP interface	Index number of the interface from which you want to remove a neighbor	Valid interface index number ? (for a list of selectable values)	First available (factory default), or current value
Neighbor address	Address of neighbor that you want to remove	Valid IP address on interface subnetwork	-

Important Considerations

Options

Prompt	Description	Possible Values	[Default]
Router ID type	Type of router identifier that you want to define	default interface address	default (factory default), or current value
IP interface	For interface router ID type only. Index of IP interface to use as router ID.	Valid IP interface ? (for a list of selectable values)	First available (factory default), or current value
Router ID	For address router ID type only. Identifier that is assigned to router in the form of an IP address	User-defined router ID (in the form of an IP address)	Unique router ID generated by system (factory default), or current value

Router ID Example (Interface Type)

Important Considerations

Fields in the IP OSPF Partition Display

Field	Description
Current partition maximum size	OSPF memory limit as implemented at the last system reboot
Configured partition maximum size	Last value that you entered, which becomes the current partition maximum size at system reboot.
Allocated partition size	Module's current working memory. OSPF dynamically allocates memory in 100,000-byte chunks, up to the current partition maximum size.

Important Considerations

Options

Prompt	Description	Possible Values	[Default]
New partition maximum size	Maximum memory size (in bytes) to allocate to OSPF system operations	Up to <maximum partition size> 0 (to specify system memory partition) 1 (to specify computation based on size of IP routing table)	1 (factory default), or current OSPF partition size

Important Considerations

Field in the IP OSPF Stub Default Metric Display

Field	Description
Stub default metric	Currently defined OSPF stub default metric

Important Considerations

Options

Prompt	Description	Possible Values	[Default]
Stub default metric	Stub default metric value to define for the area border router.	1 - 65535	Current stub default metric

Important Considerations

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to display summary information	Index number of a currently defined virtual link all ? (for a list of selectable values)	-

Fields in the IP OSPF Virtual Links Summary Display

Field	Description
Dead Intvl	Number of seconds before the area border router's neighbors declare it down, when they stop hearing the router's Hellos
Hello Intvl	Length of time (in seconds) between Hello packets
Indx	Index number of the virtual link
Password	Password for the virtual link
Rxmit Intvl	Length of time (in seconds) between link state advertisement retransmissions
Target Router	End-point area border router where the virtual link terminates
Transit Area	Common area that the virtual link uses to reach the target router
Xmit Delay	Estimated number of seconds that it takes to transmit a link state update packet over the virtual link

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to display detail information	Index number of a currently defined virtual link all ? (for a list of selectable values)	-

Virtual Link Summary Information Fields

Field	Description
Dead Intvl	Number of seconds before the area border router's neighbors declare it down, when they stop hearing the router's Hellos
Hello Intvl	Length of time (in seconds) between Hello packets
Indx	Index number of the virtual link
Password	Password for the virtual link
Rxmit Intvl	Length of time (in seconds) between link state advertisement retransmissions
Target Router	End-point area border router where the virtual link terminates
Transit Area	Common area that the virtual link uses to reach the target router
Xmit Delay	Estimated number of seconds that it takes to transmit a link state update packet over the virtual link

Virtual Link Detail Information Fields

Field	Description
Cost	Cost of sending a packet over the virtual link, expressed in the link state metric
Indx	Index number of the virtual link
Local Address	Address of the local router
Remote Address	Address of the remote router
State	State of the virtual link

Virtual Link Neighbor Information Fields

Field	Description
Indx	Index number for the interface to which a neighbor belongs
ReqQ	Number of LSAs that are being requested from the neighbor
RxQ	Number of LSAs that are in the local retransmit queue to the neighbor
State	Neighbor's adjacency: Down - No recent data received from neighbor, connection is down. Attempt - Only used on nonbroadcast networks. No recent data received from neighbor (will attempt to contact). Init - Have recently seen Hello packet from neighbor; however, two-way communication has not been established. Two-way - Bidirectional communication has been established. ExStart - Taking initial step to create adjacency between neighboring routers. Exchange - Database descriptions are being exchanged. Loading - LSA databases are being exchanged. Full - Neighboring routers are fully adjacent.
SumQ	Number of LSAs in LSA summary queue for the neighbor

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to display statistics	Valid interface index number all ? (for a list of selectable values)	-

Fields in the IP OSPF Virtual Links Statistics Display

Field	Description
adjacencyDown	Number of times that OSPF adjacencies have gone down
adjacencyUp	Number of times that OSPF adjacencies have been formed
authError	Number of authentication errors
computeDR	Number of times that the designated router was computed
lsaXsumError	Number of LSA checksum errors that have been detected
mismatchAreaID	Number of interface area ID mismatches that have been detected
mismatchAreaType	Number of interface area type mismatches that have been detected
mismatchDead	Number of router dead interval mismatches that have been detected
mismatchHello	Number of hello packet interval mismatches that have been detected
mismatchMask	Number of subnet mask mismatches that have been detected
packetXsumError	Number of packet checksum errors since the interface has come up
receiveDD	Number of database description packets that have been received
receivedUnknown	Number of unknown LSAs that have been received
receiveError	Number of general receive errors
receiveHello	Number of hello packets that have been received
receiveLsAck	Number of LSA acknowledgments that have been received
receiveLSR	Number of LSA request packets that have been received
receiveLSU	Number of link state update packets that have been received
transmitDD	Number of database description packets that have been transmitted
transmitError	Number of general transmit errors
transmitHello	Number of hello packets that have been transmitted
transmitLsAck	Number of LSA acknowledgments that have been transmitted
transmitLSR	Number of LSA request packets that have been transmitted
transmitLSU	Number of link state update packets that have been transmitted

Important Considerations

Options

Prompt	Description	Possible Values	[Default]
Transit area	Area through which the link is going	Currently defined area ID (in IP address format)	-
Target router	ID of the target router, which is the router where the virtual link terminates	Valid IP address of OSPF area border router	-

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link that you want to remove	Index number of a currently defined virtual link all ? (for a list of selectable values)	-

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to specify a new area ID	Index number of a currently defined virtual link all ? (for a list of selectable values)	-
Target area	Area ID of the transit area through which the virtual link must pass to reach the target router	ID of a currently defined area (in the form of an IP address)	Current value

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to specify a new target router	Index number of a currently defined virtual link all ? (for a list of selectable values)	-
Target router	IP address of the new destination area border router where the virtual link terminates	Valid IP address of an OSPF area border router	Current value

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to specify the transmit delay	Index number of a currently defined virtual link all ? (for a list of selectable values)	-
Transmit delay	New virtual link transmit delay (in seconds)	1 - 65535	1 (factory default), or current value

Important Considerations

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to specify the Hello interval	Index number of a currently defined virtual link all ? (for a list of selectable values)	-
Hello packet interval	Interval (in seconds) at which the area border router transmits Hello packets	1 - 65535	10 (factory default), or current value

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to specify the retransmit interval	Index number of a currently defined virtual link all ? (for a list of selectable values)	-
LSA retransmit time	Interval (in seconds) at which the area border router retransmits LSAs over the virtual link	1 - 65535	50 (factory default), or current value

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to specify the dead interval	Index number of a currently defined virtual link all ? (for a list of selectable values)	-
Dead interval	Maximum duration (in seconds) that neighbor routers wait for a hello packet before they determine that the transmitting router is inactive	1 - 65535	40 (factory default), or current value

Important Consideration

Options

Prompt	Description	Possible Values	[Default]
Virtual link	Index number of the virtual link for which you want to specify a password	Valid IP interface index number all ? (for a list of selectable values)	-
Virtual link password	Password for the specified virtual link	Up to eight ASCII characters	none (factory default), or current value

Important Considerations

Fields in the IP OSPF Policy Summary Display

Important Considerations

Fields in the IP OSPF Policy Detail Display

Field	Description
Action	Action for the route (accept or reject)
ASEType	Type of external metric - Type 1 or Type 2 - specified in the AS external link advertisement. OSPF boundary routers use Type 1 as default. Only applicable to export policies.
Index	Index number of the policy
Interface	Origin interface (Only applicable when specifying direct as Origin Protocol)