Table 8 describes the commands that are available in the command line interface.

Table 8 Command line interface commands

Command	What does it do?
logout	Exits the current user from the command line interface.
bridge agingTime	Specifies the aging time of the bridge address on the current Switch unit.
bridge display	Displays the bridge information on the current Switch unit.
bridge multicastFiltering igmp	Enables and disables IGMP multicast snooping for all units in the stack.
bridge multicastFiltering routerPort addPort	Adds a statically configured router port on any unit in the stack.
bridge multicastFiltering routerPort autoDiscovery	Enables and disables auto-discovery of router ports for all units in the stack.
bridge multicastFiltering routerPort list	Lists all router ports for all units in the stack in ascending unit/port number order, whether manually configured, or learned automatically.
bridge multicastFiltering routerPort removePort	Removes a router port from any unit in the stack, whether manually configured, or learned automatically.
bridge port address add	Adds a statically configured MAC address.
bridge port address find	Finds a MAC address within the address databases on all units in the stack.
bridge port address list	Displays a list of MAC addresses associated with the selected port.
bridge port address remove	Removes an individual MAC address.
bridge port detail	Displays detailed information about a port on the current Switch unit.
bridge port stpCost	Sets the spanning tree path cost on a port on the current Switch unit.
bridge port stpFastStart	Enables and disables spanning tree Fast Start on a port on the current Switch unit.
bridge port summary	Displays summary information about a single port, or all ports on the current Switch unit.
bridge port vltMode	Enables or disables VLT tagging on a port on the current Switch unit.
bridge stpForwardDelay	Sets the bridge Forward Delay spanning tree parameter.
bridge stpHelloTime	Sets the bridge Hello Timer spanning tree parameter.
bridge stpMaxAge	Sets the bridge Maximum Age spanning tree parameter.
bridge stpPriority	Sets the spanning tree bridge priority.
bridge stpState	Enables and disables the spanning tree protocol.
bridge vlan addPort	Adds a single port to a VLAN. Also allows you to add all ports on the current Switch unit to the selected VLAN.
bridge vlan create	Creates a VLAN.
bridge vlan delete	Deletes a single VLAN.
bridge vlan detail	Displays detailed information about a VLAN, such as port membership and statistics.
bridge vlan modify	Modifies the VLAN name for a specified VLAN ID.
bridge vlan removePort	Removes a single port from a VLAN.
bridge vlan summary	Displays summary information about a VLAN, specifically the port membership.
ethernet autoNegotiation	Enables and disables auto-negotiation for ports on the current Switch unit in the stack.
ethernet flowControl	Enables and disables IEEE 802.3x flow control for ports on the current Switch unit in the stack.
ethernet portMode	Specifies the speed and duplex mode of ports on the current Switch unit in the stack
ethernet portState	Enables and disables ports on the current Switch unit in the stack.
ethernet statistics	Displays statistical information about ports on the current Switch unit in the stack.
ethernet summary	Displays summary information about the ports on the current Switch unit in the stack.
feature analyzer add	Configures the roving analysis port (that is the port that the network analyzer will be connected to) on any unit in the stack.
feature analyzer display	Displays information about the roving analysis port configured in the stack.
feature analyzer remove	Removes the designated roving analysis port from the current port.
feature analyzer start	Specifies the roving analysis monitor port (that is the port from which data will be copied) and starts monitoring by the analysis port.
feature analyzer stop	Disables roving analysis and removes the monitor port from the roving analysis configuration.
feature broadcastStormControl	Enables and disables Broadcast Storm Control.
feature resilience define	Creates a resilient link.
feature resilience detail	Displays summary information about all resilient links present in the stack.
feature resilience remove	Deletes a resilient link.
feature resilience swap	Swaps over the "active" resilient link.
feature trunk addPort	Adds a single port to a trunk.
feature trunk detail	Displays detailed information about the trunks supported by the current Switch unit.
feature trunk removePort	Removes a single port from a trunk on the current Switch unit.
feature trunk summary	Displays summary information about all trunks.
ip interface bootp	Enables and disables BOOTP for the current Switch unit in the stack.
ip interface define	Specifies the IP information for the current Switch unit in the stack.
ip interface display	Displays the IP information for the current Switch unit in the stack.
ip ping	Allows you to ping other devices on your network.
ip initializeConfig	Allows you to reset the IP configuration back to factory defaults. This command operates on the whole stack.
snmp community	Specifies SNMP community strings for the stack.
snmp get	Performs an SNMP GET command, that allows you to retrieve values of SNMP objects from the stack.
snmp next	Performs an SNMP GETNEXT command, that allows you to specify an SNMP object and then retrieve the next few SNMP objects from the stack.
snmp set	Performs an SNMP SET command, that allows you to modify the value of an SNMP object in the stack.
snmp trap define	Specifies the trap destination details for the stack.
snmp trap display	Displays the details of the current trap destinations for the stack.
snmp trap modify	Modifies trap destination details for the stack.
snmp trap remove	Removes trap destination details from the stack.
system display	Displays administration details for the current Switch unit in the stack.
system information	Specifies administration details for the stack.
system initialize	Initializes the Switch units in the stack.
system inventory	Displays a list of the Switch units in the stack.
system module define	Sets the IP configuration for a Switch Layer 3 or Switch ATM module.
system module display	Displays the module configuration details.
system module mode	Allows you to enable or disable an intelligent module.
system password	Specifies the password for the current user.
system remoteAccess	Enables and disables all forms of remote access to the stack.
system reset	Resets the Switch units in the stack.
system security access display	Displays the access rights for all access levels in the stack.
system security access modify	Modifies the access rights for the access levels in the stack.
system security user define	Specifies the user details for the stack.
system security user display	Displays the user details for the stack.
system security user modify	Modifies user details for the stack.
system security user remove	Removes user details from the stack.
system softwareUpgrade	Allows you to upgrade the management software of the Switch units in the stack.
system unit	Moves the focus of the command line interface from one Switch unit in the stack to another.